ThermoProbe Model TP-8 (ATEX IIB is Included)
Marine Services, Inc. offers calibration on all ThermoProbe models traceable to NIST certified thermometers. Call us today for your certification needs!
Kevlar Reinforced Probe Cable is Now Available
The ThermoProbe Model TP-8 is compact, with cable storage, probe housing holders and handles molded into the case. Depending on the service, which the user needs, the case will accommodate both standard probe assembly or Asphalt probe assembly with 3/4 lb. housing and heavy duty cable. As with all ThermoProbe instruments, the probe assembly is constructed with very flexible teflon cable and stainless steel sensor components.
Easily replaceable 9V Battery provides an average of 50 hours operation. If probe assembly replacement is necessary, finger operated terminals allow tool-less connection of wires. Circuit logic automatically indicates low battery condition, shows readout integrity before each operation, automatically shuts off after one minute and displays error codes for failure determination. The low power backlight for night operation is photo sensor controlled for convenience and battery conservation. Celsius or Fahrenheit units with C/F indication can be easily chosen by an internal selector.
Intrinsically Safe Class I, Div. 1, Groups ABCD - Tested to European EMC Initiative - TIIS Approved for Japan
Specifications:
Total Weight: 3 lbs with 75 ft. cable
Approved Battery Type: 9 Volt Alkaline
Battery Life: Approximately 50 hours
Limited Warranty: 90 days on Probe Assembly, 1 year on other components
Temperature Range: 14 to 370F ( -10 to 188C ) *lower range available
Accuracy: +/- 0.3F, 32 to 220F (+/-0.2C 0 to 104C). Long term drift not to exceed 0.05%/year. Probe Assembly exchangeable to within +/-0.2 @ 32F, +/-0.6 @ 195F.
Materials: All petrochemicals, caustic, acid, alkalies, powders. Molasses, syrups, distilled spirits
Probe: Stainless Steel housing with carbon black impregnated Teflon cable jacket. Standard lengths 50', 75', 110'. Marked in 5 foot or meter increments.
Standard Weight Probe 0.22lbs/0.1kg cable 0.105"/2.6mm diameter
Asphalt Weight Probe 0.75lb/0.34kg cable 0.120"/3mm diameter, high temp PFA Teflon
Railcar Probe 0.25"/10mm diameter
Typical Applications
Custody Transfers, Inventory, Tank, Pipeline, Barge, Ship, Railcar, Tank Truck
Materials: All Petrochemicals, caustic, acid, alkalies, powders, molasses, syrups, distilled spirits
Specifications
| Maximum Dimensions: |
6.6 x 4.5 x 4.2 in.
16.7 x 11.4 x 10.7 cm |
| Total Weight: |
3.7 lbs with 75 ft. of cable
1.7 kg with 23m of cable
|
| Approved Battery Type: |
9 volt Alkaline,
Duracell MN1604
Rayovac A1604
Eveready 522
|
| Battery Life: |
Approximately 50 hours |
| Case Materials: |
6063 - T6 Aluminum |
| Limited Warranty: |
90 days on Probe Assembly
1 year on other components |
| Probe: |
Stainless Steel probe with static dissipating cable jacket and Aramid Fiber reinforcing for cut and smash resistance. Cable insulation are flourocarbon polymers such as FEP, PFA, or similar materials.
Standard lengths 50/15m 75/23m 110/34m
Marked in 5 foot or meter increments Standard weight probe 0.22 lb/ 0.1 kg cable 0.105 /2.6mm diameter
Asphalt weight probe 0.75 lb/ 0.34 kg
cable 0.120 /3mm diameter, high temperature PFA jacket.
Railcar probe 0.25/10mm diameter |
| Temperature Range: |
14 to 370 F*
-10 to 188 C*
*Lower Range Available For Cold Climates |
| Accuracy: |
+-0.2F 0 to 200F
+-0.5F >200F
+-0.1C 0 to 100C
+-0.3C >100C
Long term drift not to exceed 0.05%/year
Probe Assembly exchangeable to within
0.2 @ 32F, 0.6 @ 195F.
Meets API requirements. |
If you are interested in purchasing these products or would like additional information about these products call 1-800-421-8329 or fill out the form below and click Submit.
|
