| |
ThermoProbe TL-1W Electronic Thermometer
The ThermoProbe TL-1W is a modified field version of our successful ThermoProbe TL-1 thermometer.
The TL-1W can be ordered with a choice of 8", 12", 16", 24", or a custom length from 4" (10cm) to 39" (99 cm).
The ThermoProbe TL-1W features a rugged frame for reinforcement and is designed for continuous operation but can be easily powered off if desired.
The ThermoProbe TL-1W thermometer is intended to be used anywhere a precision glass stem thermometer or other type thermometer may be used. The ThermoProbe TL-1W incorporates glass thermometer simplicity and reliability with the ease of a digital display. Like precision mercury thermometers, the ThermoProbe TL-1W has accuracy, repeatability and long-term stability. But unlike those thermometers there will never be problems with mercury separation or hazardous material cleanup. Different from most precision electronic thermometers, the Cordless ThermoProbe TL-1W has no wires to get in the way or break. Battery replacement is easily done through a sealed cover. Encoded calibration is unaffected by temperature, vibration or battery removal. Low battery display, and failure mode indications protect the user from false data.
4 Point NIST Traceable Calibration and a one year warranty included.
NEW FEATURES exclusive to the ThermoProbe TL-1 and ThermoProbe TL-1W include:
Minimum reading, maximum reading, averaging, easier F to C switching and an optional serial output. In addition, the new display constantly indicates temperature increasing or decreasing activity.
Specifications
|
Display: |
LCD with 0.25 inch characters
Trend Indicating Arrows
Low Battery & Fault indication
|
| User Functions: |
Manual shut-off if desired
Lowest Reading, Highest Reading, Average Reading
Switchable in Units of F or C
|
| Construction: |
Stainless Steel temperature sensor;
standard lengths 8, 21cm with narrow sensing tip.
Sturdy composite frame surrounding aluminum enclosure
Electronics and display in 3.5 x 1.2 anodized Aluminum enclosure
Molded Silicone seal.
Highly durable display window, graphics and membrane switches.
|
| Weight: |
6.5 ounces, 180 grams |
| Temperature: |
-44 to 600 F, -43 to 315 C.
Complete Range 0.01 Degree Resolution,
+0.1 F Accuracy below 200F and +0.2 F above 200F
+0.07 C Accuracy below 100C and +0.15 C above 100C
|
| Temperature Response: |
32 to 200 F in 25 seconds, water bath. |
| Electronics: |
Microcontroller and precision 20 bit A/D Converter
FLASH memory
Minimum ambient temp dependant on battery condition
maximum ambient temp. 75 C
100 Ohm, Class A Platinum RTD, 0.05%/yr max. drift
|
| Battery: |
Two AAA size batteries for extended service
|
| Options: |
Stem length to 39, 1 m. Custom lengths available.
Separate probe with high temp PFE cable
Certification by independent calibration laboratory
|
| Future: |
Intrinsically Safe Certification
Serial Cable and User Software
NASA Licensed Software Algorithm for fast response.
|
If you are interested in purchasing these products or would like additional information about these products call 1-800-421-8329 or fill out the form below and click Submit.
4 Point NIST Traceable Calibration and a one year warranty included.
NEW FEATURES exclusive to the ThermoProbe TL-1 and ThermoProbe TL-1W include:
Minimum reading, maximum reading, averaging, easier F to C switching and an optional serial output. In addition, the new display constantly indicates temperature increasing or decreasing activity.
Specifications
|
Display: |
LCD with 0.25 inch characters
Trend Indicating Arrows
Low Battery & Fault indication
|
| User Functions: |
Manual shut-off if desired
Lowest Reading, Highest Reading, Average Reading
Switchable in Units of F or C
|
| Construction: |
Stainless Steel temperature sensor;
standard lengths 8, 21cm with narrow sensing tip.
Sturdy composite frame surrounding aluminum enclosure
Electronics and display in 3.5 x 1.2 anodized Aluminum enclosure
Molded Silicone seal.
Highly durable display window, graphics and membrane switches.
|
| Weight: |
6.5 ounces, 180 grams |
| Temperature: |
-44 to 600 F, -43 to 315 C.
Complete Range 0.01 Degree Resolution,
+0.1 F Accuracy below 200F and +0.2 F above 200F
+0.07 C Accuracy below 100C and +0.15 C above 100C
|
| Temperature Response: |
32 to 200 F in 25 seconds, water bath. |
| Electronics: |
Microcontroller and precision 20 bit A/D Converter
FLASH memory
Minimum ambient temp dependant on battery condition
maximum ambient temp. 75 C
100 Ohm, Class A Platinum RTD, 0.05%/yr max. drift
|
| Battery: |
Two AAA size batteries for extended service
|
| Options: |
Stem length to 39, 1 m. Custom lengths available.
Separate probe with high temp PFE cable
Certification by independent calibration laboratory
|
| Future: |
Intrinsically Safe Certification
Serial Cable and User Software
NASA Licensed Software Algorithm for fast response.
|
If you are interested in purchasing these products or would like additional information about these products call 1-800-421-8329 or fill out the form below and click Submit.
|
|
