Reid Vapor Pressure Cylinder Bath
 Constant temperature water baths designed for Reid Vapor Pressure determinations of liquid petroleum products and liquefied petroleum gases (LPG). Immerses vapor pressure apparatus at the proper depth per ASTM specifications. Controls bath temperature with ?0.1?C (?0.2?F) precision. Microprocessor PID control provides quick temperature stabilization without overshoot, and bath is protected by an over-temperature control circuit that interrupts power should bath temperature exceed programmed cutoff point. Dual LED displays provide actual and set-point temperature values in ?C/?F format. Double wall construction with fiberglass insulated stainless steel tank. A sturdy 25mm (1") flange permits flush-mounted bench top installation for easy access to bath interior. Built-in holders suspend test cylinders at the required depth. Equipped with overflow stand pipe/drain.
Conforms to ASTM D323, D1267; GPA 2140; IP 69, 161; ISO 3007, 4256; DIN 51616, 51754; FTM 791-1201; NF M 07-007, 41-010.
Capacity: 1 to 4 vapor pressure apparatus, one-opening or two-opening type
Temperature Control Stability: ?0.1?C (?0.2?F)
Maximum Temperature: 100?C (212?F)
Bath Medium: 51.9 L (13.7 gal) water
Electrical Requirements: 115V, 50/60Hz, Single Phase, 18.8A ,20?240V, 50/60Hz, Single Phase, 9.4A
Dimensions: 38.1L x 38.1W x 91.5H cm (15 x 15 x 36")
Shipping Weight: 47.7 kg (105 lbs.)
If you are interested in purchasing these products or would like additional information about these products call 1-800-421-8329 or fill out the form below and click Submit.
|
