|
|
| |
LPG Testing Equipment
 Connecting Hose
The Corrosion Test Bomb connecting hose has a 1/2" OD x 1/4" ID with 1500 psi working pressure and 3000 psi Test Pressure. Standard lengths range from 24 to 72 inches and have either the Quick Connect or Hexagon nut connection.
|
 Copper Strip Corrosion Test Bomb
The 98C Corrosion Test Bomb Cylinder is used for conducting the test for copper strip corrosion by liquified petroleum gases (LPG) according to ASTM D1838. The copper strip corrosion test cylinder (bomb) is constructed of Stainless Steel .
|
 Corrosion Test Cylinder Heater
Corrosion Test Cylinder Heater is designed especially for conducting the ASTM and N.G.P.A. Copper Strip Corrosion Test of Liquefied Petroleum Gas. Available in 12VDC or 115VAC, each unit will accommodate 4 corrosion test cylinders. Each heater is thermostatically controlled and factory set at 100F. A built-in thermometer assures accuracy and confidence. This heater was designed and built for Class I, Group D, Division II areas
|
 LPG Hydrometer Cylinder with S/S Safety Shield
LPG Hydrometer Cylinder consists of a transparent Plastic Cylinder Mounted Between Machined Aluminum End Plates And Surrounded By Stainless Steel Safety Guard. The LPG hydrometer cylinder is used together with ASTM 310H Thermo-hydrometer To Determine Density Or Relative Density Of LPG and Light Hydrocarbons. The LPG Hydrometer Cylinder is Equipped With Inlet, Outlet And Vapor Vent Valves For Admitting Sample And Purging Cylinder. The LPG Hydromerter End Plates Have Positive Sealing Buna-n O-rings And Are Joined By Sturdy Steel Support Rods. LPG Hydrometer Cylinder Top Plate Detaches Easily Without Tools For Insertion Or Removal Of Thermo-hydrometer. The LPG Hydrometer Safety Relief Valve Prevents Unsafe Pressure Build-up Inside the LPG Hydrometer Cylinder. The LPG Hydrometer Cylinder is Mounted On A Finished Steel Base.
|
 LPG Precooling Apparatus
The LPG Precooling Apparatus consists of a brass cooling Vessel With a Built-in 20 Ft. (6m) Copper Cooling Coil. Includes Compression Fittings And 1 /8 " Needle Valve At The Downstream End.
|
 LPG Corrosion Test Cylinder Needle Valves
LPG Corrosion Test Cylinder Needle Valves are stocked in the standard material 303 stainless steel. The standard material for our angle valve is 304 stainless steel. Also available in, 316/SS, Monel, Hastelloy and other alloys.The standard seat is Teflon , alternate seat is Kel-F,All valves have American Standard Pipe Threads. The 1/8" and 1/4" male pipe threads have seats that accommodate the HMI 1/4" NPT Sampling Hose Connections.
|
|
|
|
Call to order any
of the products
you find on this
website.
If you want the best certification of hydrometers, centrifuge tubes and thermometers for the best cost, you need to give us a call today !! We will match or beat any other qualified laboratory certification cost !
You will be pleased with the considerable dollar savings for you and your company.
|
|
